Changes in getlino¶
2024-12-14¶
Added an option getlino configure --weasyprint, which will install the
system packages needed when you plan to use lino.modlib.weasyprint.
Added an option getlino startsite --site-domain. And getlino
startsite asks interactively to confirm its options (as getlino
configure as does).
2024-07-08¶
The pip install getlino command as described in Install your Lino
developer environment
failed with a traceback about “invalid git executable” when the git system
package was not installed because getlino.startproject was trying to
import git at global module level. Fixed #5682 (The go command made
by getlino doesn’t find demo projects).
2024-06-27¶
When getlino startsite created the project_dir, it forgot to set
the group owner to www-data.
2024-06-21¶
getlino no longer tries to change the group owner of the file to
www-data when no such group exists. Which can happen in a developer
environment. More precisely www-data is the group name specified in
usergroup. The usergroup is needed only on a
production site with a web-server.
2024-05-30¶
getlino startsite no longer adds “.sh” to the name of the cron
script that calls make_snapshot.sh because these files, according to
run-parts “must consist solely of upper- and lower-case letters, digits,
underscores, and hyphens.” (Story: A miracle in cron?)
2024-05-18¶
Fixed a bug in getlino startsite when writing the linod.sh file.
2024-04-02¶
Fixed #5530 (getlino startsite says Error: Invalid front_end name ‘None’).
Optimize output of getlino list. Replace python-dev by
python3-dev to fix “Package ‘python-dev’ has no installation candidate”
2023-10-08¶
Fixed a bug that caused getlino configure --clone to reinstall itself,
which later caused “jinja2.exceptions.TemplateNotFound: healthcheck.sh”.
2023-07-16¶
Add a default server section to nginx.conf to avoid Invalid
HTTP_HOST header.
2023-02-23¶
Release to PyPI.
2023-02-28¶
Removed the branch option from getlino config. Getlino is now
branch-agnostic: it always uses the default branch of a repository.
2023-02-15¶
getlino.utils.Installer.write_file() now creates the directory if needed.
2023-02-10¶
When running as root, getlino now stores its configuration file in the virtual
environment and no longer under /etc/getlino/getlino.conf. The
/etc/getlino/getlino.conf may theoretically still get used when getlino
is installed without any virtualenv into the system Python (which currently is
not recommended but might make sense when Lino becomes a Debian package). After
upgrading you should manually run:
# echo $VIRTUAL_ENV
# mv /etc/getlino/getlino.conf $VIRTUAL_ENV/.getlino.conf
2022-12-25¶
Release to PyPI.
2022-12-23¶
Fixed #4722. The pull.sh script generated by getlino
startsite now also updates the internal dependencies (rstgen, lino, xl and
–for some apps– welfare).
2022-12-01¶
getlino now uses async consumers instead of running a separate linod process. Cheat sheet for the upgrade:
re-run
getlino startsiteon each production siteremove the supervisor conf files for the linod processes.
2022-05-26¶
getlino startsite no longer creates a database and a db user when a
settings.py exists. When run for an existing site, it now “reinstalls”
only what’s missing.
Release to PyPI.
Fix some typo bugs and other optimizations after using getlino startsite on the field.
Release to PyPI.
2022-05-24¶
getlino list now supports site features without description.
Release to PyPI.
2022-05-20¶
Release to PyPI, which fixes multiple minor bugs. For example (excerpt from git log): add GitPython to requirements, fix missing app sections in apps.rst, add avanti and polly to tested_applications, activate make_help_pages by default after startsite, explicitly specify db_engine, (…)
Fixed 2 bugs reported after the release: getlino startsite created a
settings.py file with empty --db-port. It also refused to
proceed when not running as root (and when the site wanted mysql or postgresql
as --db-engine).
2021-07-15¶
New command getlino startproject.
Release to PyPI
2021-06-20¶
getlino configure was saying error “Unable to locate package
libreoffice-headless”. Yes indeed, there is no such package in buster, we must
install libreoffice-common instead.
Release to PyPI.
2021-06-19¶
Fixed #4218 (getlino says AttributeError: ‘list’ object has no attribute ‘add’).
Release to PyPI.
2021-04-27¶
Added a new command getlino list.
2021-04-12¶
Updated the KNOWN_REPOS in getlino.utils: the following repositories have
moved to GitLab: lino, xl, noi, cosi, voga, avanti, welfare, weleup, welcht
2021-03-16¶
You can now run getlino configure as root with --clone and without
--shared-env, provided that you activated a virtualenv before calling
getlino. In that case getlino will install clones into the current virtualenv
and store the current virtualenv in the system-wide config file. Miscellaneous
optimizations and bugfixes when setting up a demo server.
Release to PYPI.
More minor bugfixes: healthcheck.sh wasn’t set to executable. configure failed when –https was given but no –web-server
2021-03-14¶
getlino forgot to run sudo ln -s /snap/bin/certbot /usr/bin/certbot when installing certbot.
2021-03-11¶
When –https is specified but certbot is not installed, getlino now installs it using snapd (no longer using wget and apt-get)
2021-03-08¶
Release 21.3.0 to PyPI.
2021-03-05¶
Optimization: When getlino asks to change file permissions, it now formats them as “rwx” style strings instead of decimal integers.
2021-03-02¶
Fixed #3998 (getlino says Invalid value for ‘–web-server’: invalid choice: . (choose from nginx, apache)). Reactivated UbuntuDockerTest in test suite. getlino now upgrades the system not only when you are root but also when you are member of sudo. It no longer asks “Upgrade the system?” as a separate question, only when it actually wants to install packages (and when you are either root or sudoer).
2021-02-13¶
Fixed a bug in the generated make_snapshot.sh file: it was testing if
[-f media/uploads] instead of if [-d media/uploads], as a result the uploads
were never included in the snapshot.
2021-02-12¶
Fixed a problem when using apache config: certbot made a copy of the 80 conf
file, but failed to copy the WSGI* directives. Now getlino creates a 443 site
with snakeoil certificate already from the beginning. Added uploads to
make_snapshots.py.
Released version 21.2.1 to PyPI.
2021-02-10¶
Changed the number of nginx worker processes in the uwsgi.ini script from 2 to 1 as every worker process immobilizes about 5 to 6% of 2GB of RAM even when nobody is using the site.
Added support for apache web server. Until now, getlino always installed nginx
(when running as root). Now getlino configure has a new option
–web-server, which can be “nginx”, “apache” or empty. Changed behaviour: When
not given, getlino will not setup any web server configuration, even when
running as root.
The test suite now also tests for “ERROR” (not just “Error”) in the output of
healthcheck.sh. Increased the wait time for supervisor to restart from
10 to 20 seconds because with only 10 seconds it failed once.
Released version 21.2.0 to PyPI.
2021-02-08¶
Fixed several minor bugs in getlino startsite: Fixed a typo bug that caused
--https to fail at the last step (when calling certbot for the new
subdomain). Some config files were generated with a leading newline, and the
make_snapshot cron job even with leading blanks on every line. The
nginx.conf file was still pointing /static/ to a directory static,
but the new default name for this is static_root.
2020-09-23¶
getlino configure now again installs (or instructs to install) apt packages libldap2-dev and libsasl2-dev, which are –as it seems– required for django_auth_ldap.
2020-09-21¶
When invoking getlino configure without sudo, it no longer asks for –usergroup.
Released getlino 20.9.0 to PyPI.
2020-09-02¶
getlino can now install certbot either using the Debian packager or using
certbot-auto. getlino now supports calling Installer.run_apt_install()
more than once during an installation session.
2020-08-27¶
getlino startsite has now the database options (db-engine, db-user etc)
so that you can override them per site without needing to run getlino configure.
Added a new choice lino.projects.std for the APPNAME argument of
getlino startsite. Fixed a warning bash: warning: setlocale:
LC_ALL: cannot change locale (en_US.UTF-8) during test run.
2020-07-29¶
Released getlino 20.7.5 to PyPI. With a few bugfixes.
2020-07-20¶
Released getlino 20.7.3 to PyPI. After some subtle changes.
Released getlino 20.7.4 to PyPI. After some more subtle changes.
2020-07-19¶
Released getlino 20.7.2 to PyPI.
2020-07-17¶
getlino failed on Python 3.8 because it was using the deprecated
platform.dist. Now it uses distro.
getlino now shows its version.
Released getlino 20.7.1 to PyPI.
local-prefix was root_only, which caused configure to fail when not run as root.
2020-07-16¶
getlino failed on Windows because the grp module is not available there. Now we simply skip the group ownership check when running on Windows.
Reorganized the Docker files.
Released getlino 20.7.0 to PyPI.
2020-06-23¶
getlino startsite now creates a daily cron job that runs
make_snapshot.sh.
2020-05-14¶
Remove useless command to copy “mysql_config” file for MariaDB.
2020-05-14¶
Bugfix : getlino configure without –clone, the –shared-env now
defaults to an empty string.
2020-05-04¶
getlino configure now defaults --shared-env to the current
VIRTUAL_ENV only when --clone was given, not always.
And it creates the repos_base only then.
2020-04-07¶
Fix typo with apt_packages of DbEngine. Release 20.4.5 version to PyPI.
2020-04-03¶
Remove certbot for www domain Release 20.4.3 version to PyPI.
2020-04-03¶
Update the virualenv usage. Fix issue with installing mariadb for debian distribution instead of mysql
2020-01-03¶
Add the ciao projet to KNOWN_REPOS. Add ‘sudo’ to the certbot command.
Fix some issues with creating user and database with the getlino startsite .
Released version 20.1 to PyPI Released version 20.1.1 to PyPI
No need for ‘sudo’ for certbot command
Released version 20.1.2 to PyPI
2019-11-23¶
When the user is not root , the getlino startsite command doesn’t create
the make_snapshot.sh and the directory nginx.
2019-11-09¶
The pull.sh script generated by getlino configure into the
shared virtualenv was still using the project_dir.
2019-11-07¶
The --https option was appending directly to the
main /etc/crontab file. Fixed.
Fixed some minor bugs. For example the --redis option
was ignored when not running as root.
Released 19.11.0 to PyPI.
2019-11-06¶
getlino configure --db-user option now creates the shared database user.
The items of getlino.utils.DB_ENGINES are no longer named tuples but
real objects with methods.
2019-10-25¶
getlino no longer depends on cookiecutter. The separate cookiecutter-startsite
repository is no longer used because all templates are now below
getlino/templates.
Released version 19.10.6 to PyPI (versions 19.10.3 to 19.10.5 are broken versions, don’t use them).
2019-10-08¶
Released version 19.10.0 to PyPI.
Fixed some bugs: Running getlino configure without
--db-port caused an error Invalid value for "--db-port":
invalid choice: . (choose from 5432, 3306, 0). The --db-port option
is no longer a choice (it is not limited to these values). The --clone
option sometimes had True as default value when it shouldn’t.
Released version 19.10.1 to PyPI.
Found another bug: with --clone, getlino didn’t clone the repositories
using their nickname, which later caused failures when trying to install them.
Released version 19.10.2 to PyPI.
Fixed some more bugs: Running getlino configure without
--db-port caused an error Invalid value for "--db-port":
invalid choice: . (choose from 5432, 3306, 0). The --db-port option
is not a choice (it must not limited to these values). The --clone
option sometimes had True as default value.
2019-10-03¶
The --db-port shows the default ports of databases.
2019-09-19¶
The --clone option installs all contributor
repositories, i.e. those required to build the book. Some repositories were
still missing. Fixed. Also separated the sequence of resulting actions: first
run “git clone” for all repos, then “pip install -e”.
2019-09-18¶
Optimized behaviour when running as non-root:
The default value for --devtools is now True in that case.
--db-engine had a wrong default value “sqlite” (must be “sqlite3”),
getlino tried to create the directories given by
--log-base and --backups-base (which failed because not
running as root).
2019-09-14¶
When running as root, getlino configure now also creates empty
directories for --log-base and --backups-base and sets their
permissions.
2019-09-12¶
When running as root, getlino now also installs the build-essential Debian package because this is maybe needed for installing Python extensions.
getlino didn’t set the group owner in some cases (e.g. the lino_local directory and a project’s virtualenv).
getlino configure now also creates a ~/.bash_aliases file. But
only when you aren’t running as root. After running getlino configure as
root, you may want to run it once more without being root to create a
.bash_aliases file to your home directory.
Released getlino 19.9.6 to PyPI, immediately followed by a bug-fix release 19.9.7
2019-09-09¶
Added more demo projects to be used by the getlino configure command. Released getlino 19.9.5.
2019-09-08¶
Renamed the --contrib option to --clone because it is also used
when configuring a demo server. It means “clone all known repositories
to the –repos-base and install them to the shared-env using pip -e.”
This change requires that you run getlino configure once after upgrade,
or manually edit your getlino config file.
The configure command now supports --clone without specifying a
–repos-base. In that case it uses the repositories subdir of the shared-env.
New option --shared-env for startsite. When used with startsite, it
overrides the value specified during configure.
Released getlino 19.9.4 on PyPI.
2019-09-07¶
Released getlino 19.9.2 on PyPI, followed by a bugfix release 19.9.3.
2019-09-02¶
Also write logrotate config file for supervisor.
Changed some default values
in getlino configure:
The default value for --clone was wrong : when
running as root, it is not a contributor environment.
--shared-env
and --repos-base are now empty when
VIRTUAL_ENV is not set.
And --db-engine is now mysql when running as root.
Released getlino 19.9.0 to PyPI, followed by a bugfix release 19.9.1.
2019-08-27¶
Released getlino 19.8.1 on PyPI.
2019-08-01¶
Released getlino 19.8.0 on PyPI.
2019-07-30¶
Added a first meaningful unit test (test_docker_prod).